500ML/can, 24cans/carton ( 37*28*25cm ), 1115 cartons to a container(20 inch); 1L/can, 12cans/carton( 45.5*34.5*14cm) ,1318 cartons to a container(20 inch) ; 3L/can, 6cans/carton( 35*33*26cm),966 cartons to a container(20 inch)
20 days after receiving deposit
SYNID brake pad glue/adhesive
Brake pad adhesive is a special glue for bonding brake pads with its compenent mental and repairing car accessories, which is in stable quality and widely accepted in global market. Using the latest heat-resistance resin and process, which can guarantee the car a higher safe operation performance: the strongest mechanial properties, heat resistance, moisture resistance, ading resistance, impact resistance, high temperature performance, to the curing temperature low and has good toughness, Mainly uesd for drum or plate car brakes, motorcycles, electrice motorcycles, industrial brake pad bonding. Suitable for brush and roller coating technology.
Instructions for use
1 The glue is heat curing, after applied, must be given heat to 150°C - 180°C ,and keep the heating 25-45 mins. Not Need to mix with any diluents or solvent.
2 Can brush, also can spray after attenuated.
3 The application adhesive could be achieved after drying for 2-3 hours at the room temperature of 25°C.
The adhesive performance is available after drying 24 hours.
: 0.97 ± 0.04
Initial adhesion peeling strength
Color after Curing
A very strong adhesive is obtained through type-204, which is resistance to degradation by humidity or high temperature.
This product contain solvents in which its vepours may cause nose and threst disorders, headache, nausea, weakness. Fatigye and eye watering. After handing, always wash hands throughly with soap and water. Store away from heat souress and naked flames, under over and well ventilated.